Sprague, C.J. and Sprague, J.E. (2016), “Testing and Specifying Erosion Control Products”, Conf. XXXXVI, International Erosion Control Assoc., San Antonio, TX, (digital proceedings).

Sprague, C.J. and Sprague, J.E. (2015), “Performance Evaluations of Erosion and Sediment Control BMPs using Independent Full-scale Simulations”, StormCon, Austin, TX.

Sprague, C.J., Ruzowicz, B., and Sprague, J.E. (2015), “Evaluating Inlet Protection”, Conf. XXXXV, International Erosion Control Assoc., Portland, OR, (digital proceedings).

Sprague, J.E., Sprague C.J., and Ruzowicz, B. (2015), “Evaluating Floating Surface skimmers”, Conf. XXXXV, International Erosion Control Assoc., Portland, OR, (digital proceedings). Most Distinguished Technical Paper Award

Sprague, C.J., Ruzowicz, B., and Sprague, J.E. (2014), “Evaluating Channel Check Dams”, Conf. XXXXV, International Erosion Control Assoc., Nashville, TN, (digital proceedings).

Sprague, C.J., Ruzowicz, B., and Sprague, J.E. (2014), “Evaluating Sediment Barriers”, Conf. XXXXV, International Erosion Control Assoc., Nashville, TN, (digital proceedings).

Sprague, C.J. and Sprague, J.E. (2013), “Testing and Specifying Rolled Erosion Control Products”, Proc. of Geosynthetics 2013, IFAI, Long Beach, (digital proceedings).

Sprague, C.J., Kemp, P., and Sprague, J.E. (2013), “Performance Testing of Reinforced Turf-Lined Channels”, Conf. XXXXIV, International Erosion Control Assoc., San Diego, CA, (digital proceedings).

Sprague, C.J (2013), “The Evolution of Geosynthetics in Erosion and Sediment Control”, GRI-25, Geosynthetic Institute Conference, Long Beach, (digital proceedings).

Sprague, C.J., Kemp, P., and Sprague, J.E. (2013), “Performance Testing of Traditional Erosion Controls”, Conf. XXXXIV, International Erosion Control Assoc., San Diego, CA, (digital proceedings).

Sprague, C.J., Sprague, J.E., and Allen, S.R. (2012), “Large-scale Performance Testing of Erosion Control Products”, Proc. of GeoAmericas, IFAI, Lima, Peru, (digital proceedings).

Allen, S.R. and Sprague, C.J (2011), “Carbon Footprint Implications of the Erosion Control Response”, GRI-24, Geosynthetic Institute Conference, Salt Lake City, (digital proceedings).

Smith, J.L., Bhatia, S.K., and Sprague, C.J. (2010). Comparison of geosynthetic rolled erosion control product (RECP) properties between laboratories, Scour and Erosion, Ed. by S.E. Burns, S.K. Bhatia, C.M. Avila, and B.E. Hunt, Proceedings of the Fifth International Conference on Scour and Erosion, Geotechnical Special Publication No 210, American Society of Civil Engineers, 212-221.

Sprague, C.J. and Lacina, B. (2010), “Performance Testing of Sediment Retention Devices”, Conf. XXXXI, International Erosion Control Assoc., Dallas, TX, (digital proceedings).

Sprague, C.J. and Nelson, J. (2009), “Correlation of Bench-scale and Large-scale Performance Testing of RECPs”, Conf. XXXX, International Erosion Control Assoc., Reno, NV, (digital proceedings).

Sprague, C.J. (2008), “Slope Erosion Testing – Identifying “Critical” Parameters”, Conf. XXXIX, International Erosion Control Assoc., Orlando, FL, (digital proceedings). Most Distinguished Technical Paper Award

Sprague, C.J. (2006), “Laboratory Testing Of Sediment Retention Devices”, Conf. XXXVII, International Erosion Control Assoc., Philadelphia, PA, (digital proceedings).

Sprague, C.J. (2005), “Bench-scale Performance Testing of RECPs – Review of Data”, Conf. XXXVI, International Erosion Control Assoc., Dallas, TX, (digital proceedings).

Sprague, C.J. (2004), “Testing the Effectiveness of Sediment Retention Devices”, StormCon ‘04, Palm Desert, CA, (digital proceedings).

Sprague, C.J. and Carpenter, T. (2004), “A New Procedure for Testing the Effectiveness of Sediment Retention Devices”, Conf. XXXV, International Erosion Control Assoc., Philadelphia, pp. 265-275.

Sprague, C.J. and Carpenter, T. (2003), “An Update on Recent Silt Fence System Research”, 56th Canadian Geotechnical Society Conference, Winnipeg, Manitoba.

Sprague, C.J. (2003), “A Field Study of Silt Fence Installations Around the United States”, Conf. XXXIV, International Erosion Control Assoc., Las Vegas, pp. 359-368.

Sprague, C.J. (2002), “Performance Testing of Various Silt Fence Installation Techniques”, Proc. of Conf. XXXIII, International Erosion Control Assoc., Orlando, pp. 529-538.

Sprague, C.J., Carver, C.A., and Allen, S. (2002), “Development of RECP Performance Tests,” Geotechnical Testing Journal, ASTM, December, pp. 1-10.

Sprague, C.J., Allen, S., Nelson, J. (2002), “New Performance-Related Index Tests for Rolled Erosion Control Products”, Proc. of Conf. XXXIII, International Erosion Control Assoc., Orlando, pp. 541-552.

Sprague, C.J., Carver, C.A., and Rikken, J. (2000), “Reinforced Turf vs. Hard Armor – A Case History”, Proc. of Conf. XXXI, International Erosion Control Assoc.,, Palm Springs, pp. 247-259.

Sprague, C.J.,. (1999), “Assuring the Effectiveness of Silt Fences and Other Sediment Barriers”, Proceedings of Conference XXX, Int’l Erosion Control Assn., Nashville, pp. 133-154.

Sprague, C.J. (1997), “Geotextile Containers for Erosion Control ‑ A Literature Review”, Proceedings of Geosynthetics ’97, Industrial Fabrics Assn. Int’l, Long Beach, CA, pp. 135‑145.

Sprague, C.J., and Luna, J. (1997), “Design of Erosion Control Materials for Life‑Time Performance”, Proceedings of Conference XXVIII, Int’l Erosion Control Assn., Nashville, TN., pp. 121‑134.

Sprague, C.J. and Paulson, J.N. (1996), “Project‑Specific Selection of Erosion Control Geosynthetics”, Proceedings of Conference XXVII, Int’l Erosion Control Assn., Seattle, WA., pp. 213‑226.

Koutsourais, M.M., and C.J. Sprague (1992), “An Inside Look at Articulating Concrete Block Revetments,” Proceedings of Conference XXIII, International Erosion Control Assn., pp. 49‑55.

Sprague, C.J., and M.M. Koutsourais (1992), “Erosion Control Using Fabric Formed Concrete Revetment Systems,” Geotextiles and Geomembranes, Vol. 11, Nos. 4‑6, pp. 587‑609.